840 - 960 MHZ UHF RFID Card Reader Module with 9200 sensor
Employed 9200 RF Chips, up to -82dbm receiving sensitivity and the
highest performance in this field makes this module more suitable
for harsh application environment.
Low power consumption, brilliant performance.
|Air interface protocol||EPCglobal UHF Class 1 Gen 2/ISO 18000-6C|
|Support area||China, Europe, America, Korea, Japan, Taiwan ......|
|Operating Voltage||DC 5V|
|Maximum operating current||＜350mA|
|Maximum RF output power port||28dBm|
|Tag maximum read distance||＞2.5 m (2dBi ceramic antenna + normal white card)|
|Maximum receiver sensitivity||-60dBm|
|Serial communication parameters||Baud rate adjustable (default 115200bps), Parity: None Data bits:
8, stop bits: 1|
|Module Interface||Pick + 20PIN 2.0MM pitch stamp holes 10PIN FPC|
|Dimension||30.0×25.0×4.0MM (Including shield)|
M2100 FPC PIN Definition
|1||UART TX0||Serial interface to send, TTL level|
|2||UART RX0||Serial interface reception, TTL level|
|6||P_EN||Power enable pin, set low (0V) when the module enters Sleep mode|
|9,10||VCC||Power supply pin, the input voltage is 3.7V ~ 5.5V|
M2100 Stamp hole defined PIN
|1||VCC||Power supply pin, the input voltage is 3.7V ~ 5.5V|
|3||P_EN||Power enable pin, set low (0V) when the module enters Sleep mode|
|3||SWCLK||Serial debug clock signal|
|4||SWDIO||Serial debugging data input and output|
|11||UART RX0||Serial interface reception, TTL level|
|12||UART TX0||Serial interface to send, TTL level|
|15||UART TX1||Serial interface to send, TTL level|
|16||UART RX1||Serial interface to send, TTL level|
|21||RF_OUT||RF antenna interface|
Q1. Can I have a sample order for reader ?
A: NO , you need buy sample
Q2. What about the lead time?
A:Sample needs 3-5 days, mass production time needs 1-2 weeks for
order quantity more than
Q3. Do you have any MOQ limit for reader order?
A: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5
days to arrive. Airline and sea shipping also optional.
Q5. How to proceed an order for reader?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our
Thirdly customer confirms the samples and places deposit for formal
Fourthly We arrange the production.
Q6. Is it OK to print my logo on reader product?
A: Yes. Please inform us formally before our production and confirm
the design firstly based on our sample.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 1 years warranty to our products.
Q8: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control
system and the defective rate will be less
Secondly, during the guarantee period, we will send new reader with
new order for small quantity. For
defective batch products, we will repair them and resend them to
you or we can discuss the solution i
ncluding re-call according to real situation.