Durable 4 Ports Uhf Rfid Reader 840-960mhz With Impinj R2000 Module
F5860H is a four port UHF RFID fixed reader, which embeds the M2240
module. Its communication interfaces can be USB, RS485, RS232, and
100M Ethernet, etc.. It has four TNC antennae interfaces, with a
protection level of IP64. Aluminium alloy of the whole body makes
this reader more rugged and durable as well as the excellent heat
dissipation capability, antijamming capability and lightning-proof
F5860H is suitable for RFID intensive and more challenging
environment and required a higher reading/writing performance, such
as warehousing, logistics, production line management, etc..
- Remarkable performance, can achieve a reading distance over 8m for
single tag reading with 8dbi RF antenna.
- Remarkable performance in intensive taps reading can attain a tags
identification rate of 400tags/s.
- Provide the most comprehensive functions SDK and ports, easy to
integrate RFID software.
- Adopted integrating RF chip, module performance is more stable, and
more suitable for harsh application environment.
- The use of carrier wave cancellation technology makes the tags
reading more accurate and reading scope wider.
- Provide four TNC antennae interfaces, users can achieve superior
reading performance with less equipment deployment.
|Tag Protocol||EPCglobal UHF Class 1 Gen 2/ISO 18000-6C|
|Supporting Working Area||China, Europe, the United States, South Korea, Japan, Taiwan……|
|Operating Voltage||12V||DC power supply|
|Maximum operating current||1A||Test of transmit power in 30dBm state|
|RF port maximum output power||1W(30dBm)|
|Antenna interface impedance||50Ω|
|Serial communication parameters||Baud rate adjustable(default 115200bps),parity bit:0 ,data bit:8
|Power output settings||5～30dBm adjustable /Adjustable minimum interval of 1dBm(default
|High temperature automatic protection function||support|
|Power supply enable||support|
3-Road GPIO can only input can not be input,GPIO port default is
low, the output high level of 5V,GPIO 3 IS USDED TO CONTROL LED
state indicator(green) and buzzer
Power indicator: Red
Status indicator: Green
|Communication Interface||USB,RS232,RS485,Ethernet||Only one of the communication interfaces on the F5860-H can be used
alone. Do not communicate with each other at the same time.|
|Antenna interface||Four TNC||The F5860-H working antenna defaults to antenna 1.Antenna
parameters can be configured: working antenna, working time,
12V/3A Power Adapter:1
Serial line: 1 root
PIN Green Terminal Interface Definition
|3||EN_OUT||Equipment enable control interface,When the high level input, the
device will be in a state of sleep.The high level voltage is 5V.|
|4||GPIO1||GPIO port output, can be programmed to control the level of
output.The output high level is 5V, the low level is 0V.The maximum
output current is 100mA. (The default output level is low level 0V)|
|5||GPIO2||the same as above|
|6||GPIO3||the same as above(note:Equipment has occupied this interface for
the green LED lights and buzzer control)|
|7||NC||Reserved interface, no function|
|8||NC||Reserved interface, no function|
|9||WIFI_RESET||Device WIFI configuration parameter reset pin,this pin and the GND
pin short to 10 seconds to restore the factory settings WIFI.|
Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown
cartons. If you have legally registered patent,
we can pack the goods in your branded boxes after getting your
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the
photos of the products and packages
before you pay the balance.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF