High Perfermance Single Port UHF RFID Reader Module With Impinj
- Employed IMPINJ R2000 RF Chips, up to -82dbm receiving sensitivity.
- Remarkable performance with 6dbi RF antenna, can achieve a reading
distance over 8m per single tag.
- Remarkable performance in intensive taps reading can attain a taps
identification rate of 400tags/s.
M2210 UHF RFID Reader module is a high-performance reader/writer
designed for high challenging RFID application environment. It
employs the newest R2000 RF chip providing the customers
unprecedented performance of reading and writing experience.
The maximum power output of this module is 30dBm, with 6dbi
antenna, which can realize a efficient reading/writing distance of
8m or above, and over 400tags/s for tags identification. Meanwhile,
the compact design makes this module smaller, coupled with the low
working voltage of 3.7V, the module is particularly suitable for
application in a device such as a handset.
Product Electrical Parameters
|1||Working Voltage||DC 3.7～5V|
|8||Tag Protocol||EPCglobal UHF Class 1 Gen 2 / ISO 18000-6C|
|9||Working Frequency||840～960 MHz|
China 1,China 2
US, Canada and other regions following U.S. FCC
Europe and other regions following ETSI EN 302
208 with & without LBT regulations Japan,Korea,
|11||RF IC||Impinj R2000|
|12||Output Power||Software adjustable, step interval 1.0dB, maximum 30dBm|
|13||Output Power Flatness||±0.2dBm|
RF Port Standing
|16||Reading Distance||≥10m(With 8dBi antenna/Relate to tags type, transmitted power and
|17||Multi-tag Reading||≥400 tags/s|
|19||Interface Communication Rate||115200bps|
|20||Working Temprature Detection||support|
|24||LED||Red light (power indicator )|
|25||Product Cooling Way||Aluminum metal case as cooling fin for the module|
|1||UART_TX||I/O||TTL UART Transmit|
|2||UART_RX||I/O||TTL UART Receive|
|6||PWREN_MODULE||I/O||When Pull Down This Pin to Ground,The Module Enter Sleeping Mode.|
|9||VCC||Power||DC 3.7V to 5V Power Input.|
The M2210 module developed a corresponding development board kit,
coupled with the rapid technology of ultra-high frequency
demonstration software DEMO, customers can easily and quickly
familiar with the use of M2210 module, and related hardware and
software development, shorten the development cycle.
The M2210 development board has a wealth of peripheral interfaces:
RS-232, RS485, USB, network interface, wireless WIFI, Wiegand.
Customers can choose according to the actual use of the situation.
Development board kit includes: M2210 + development board 1 set,
12V power adapter 1, 1 interface cable. Development board size:
22.0 × 12.0 × 3.5CM.
Note: Development board related configuration to be purchased
Q1. Can I have a sample order for reader ?
A: NO , you need buy sample
Q2. What about the lead time?
A:Sample needs 3-5 days, mass production time needs 1-2 weeks for
order quantity more than
Q3. Do you have any MOQ limit for reader order?
A: Low MOQ, 1pc for sample checking is available