Four Ports Radio Frequency Identification Reader , UHF Rfid Reader
1. Support EPCglobal UHF Class 1 Gen 2 / ISO 18000-6C/ ISO18000-6B
standard electronic tags;
2. Workingfrequency 860-868MHZ,902-928MHZ(Can be adjusted according
to the requirements of different countries or regions);
3. Support RS232,RS485 ,TCP/IP and wireless communication ways;
4. Support 1, 2, 4 external TNC antenna interface;
5. Output power up to 30 dbm(Adjustable), inventory tags peak
velocity, > 700 PCS/SEC;
6. Support active ,command and trigger a variety of work modes;
7. Reading buzzer and LED status indicator;Support online upgrade
firmware through communication interface;
8. Reader provide 3 road light isolated input, 3 road light output
I/O interface, convenient for application integration
|Tag Protocol||EPCglobal UHF Class 1 Gen 2/ISO 18000-6C|
|Supporting Working Area||China, Europe, the United States, South Korea, Japan, Taiwan……|
|Operating Voltage||12V||DC power supply|
|Maximum operating current||1A||Test of transmit power in 30dBm state|
|RF port maximum output power||1W(30dBm)|
|Antenna interface impedance||50Ω|
|Serial communication parameters||Baud rate adjustable(default 115200bps),parity bit:0 ,data bit:8
|Power output settings||5～30dBm adjustable /Adjustable minimum interval of 1dBm(default
|High temperature automatic protection function||support|
|Power supply enable||support|
3-Road GPIO can only input can not be input,GPIO port default is
low, the output high level of 5V,GPIO 3 IS USDED TO CONTROL LED
state indicator(green) and buzzer
Power indicator: Red
Status indicator: Green
|Communication Interface||USB,RS232,RS485,Ethernet||Only one of the communication interfaces on the F5860-H can be used
alone. Do not communicate with each other at the same time.|
|Antenna interface||Four TNC||The F5860-H working antenna defaults to antenna 1.Antenna
parameters can be configured: working antenna, working time,
12V/3A Power Adapter:1
Serial line: 1 root
PIN Green Terminal Interface Definition
|3||EN_OUT||Equipment enable control interface,When the high level input, the
device will be in a state of sleep.The high level voltage is 5V.|
|4||GPIO1||GPIO port output, can be programmed to control the level of
output.The output high level is 5V, the low level is 0V.The maximum
output current is 100mA. (The default output level is low level 0V)|
|5||GPIO2||the same as above|
|6||GPIO3||the same as above(note:Equipment has occupied this interface for
the green LED lights and buzzer control)|
|7||NC||Reserved interface, no function|
|8||NC||Reserved interface, no function|
|9||WIFI_RESET||Device WIFI configuration parameter reset pin,this pin and the GND
pin short to 10 seconds to restore the factory settings WIFI.|
Q: You are factory or trading company?
A: We are original equipment manufacturer in RFID UHF reader for
over 12 years.
Q: How is your QC?
A: We have strict QC process and all the products will be 100%
testing before shipping.
Q: What is your payment term?
A: 100% payment should be paid before shipping.
Q: What is your payment way?
A: T/T, Western Union, Alibaba trade assurance order.
Q: What is your warranty?
A: within 1 year.
Q: Can I get technical support from you?
A: Sure. we can customize firmware and development application
software for customers.